<div class=”breadcrumb”>Home > Products > Fixed Steel Ladders > <strong>Hot-Dip Galvanized</strong></div>

Hot-Dip Galvanized Fixed Steel Ladders — Q235B/Q345B HDG Series

Hot-dip galvanized (HDG) fixed steel ladders from Dengtai: the most cost-effective corrosion protection for industrial steel ladders. Our HDG process immerses the completed welded ladder assembly in a molten zinc bath at 450 degrees C, producing a metallurgically bonded zinc-iron alloy coating that protects every surface — including interior rung connections, weld areas, and cut edges.

About Hot-Dip Galvanizing

Hot-dip galvanizing provides corrosion protection through two mechanisms:

Barrier protection: The zinc coating physically isolates steel from moisture and oxygen.
Cathodic protection: Zinc sacrificially corrodes to protect exposed steel at scratches or cut edges.

The resulting coating is typically 80-100um thick, providing 15-25 years of maintenance-free outdoor service in non-coastal environments.

HDG Fixed Ladder Product Line

Model	Material	HDG Thickness	Height	Width	Load	Price (USD/m)
FL-HDG-STD	Q235B	>=80um	2-6m	600mm	300 lbs	$23.00
FL-HDG-EXT	Q235B	>=80um	6-10m	600mm	300 lbs	$23.00
FL-HDG-HD	Q345B	>=100um	2-10m	700mm	450 lbs	Custom Quote

</div>

View FL-HDG-STD Details →
View FL-HDG-EXT Details →
View FL-HDG-HD Details →

HDG Coating Specifications

Property	Standard HDG	Heavy-Duty HDG
Coating Thickness	>=80um	>=100um
Zinc Bath Temperature	450 deg C	450 deg C
Standard	ISO 1461 / ASTM A123	ISO 1461 / ASTM A123
Typical Outdoor Service Life (Non-Coastal)	15-25 years	20-30 years
Typical Indoor Service Life	50+ years	50+ years
Coating Appearance	Bright silver matte	Slightly thicker, same appearance

Coating thickness is verified on every production batch with a digital gauge. Test records are included in shipment documentation.

When to Choose HDG vs Stainless Steel

Condition	Recommended Material
Indoor industrial, non-corrosive	HDG (Q235B) — most cost-effective
Outdoor, non-coastal (inland)	HDG (Q235B) — 15-25 year service
Outdoor, coastal (within 5km of saltwater)	SS316 — HDG service life reduced in salt spray
Food processing / pharmaceutical	SS304 — surface hygiene requirements
Chemical plant, H2S or chlorine exposure	SS316 — HDG unsuitable
Heavy industrial (steel mills, foundries)	HDG (Q345B heavy-duty) — higher load + thick coating

For a detailed comparison: Material Selection Guide →
For stainless steel options: Stainless Steel Fixed Ladders →

Frequently Asked Questions

What is the minimum order quantity for steel ladders?
Standard models: 1 unit. Custom-engineered ladders: 5 units minimum. This is one of the lowest MOQs in the Chinese steel ladder manufacturing industry. Most competitors require 10-20 units.

What payment terms does Dengtai accept?
Standard terms: T/T 30% deposit with 70% balance before shipment. For orders exceeding $10,000, L/C at sight is available. We do not accept D/A or open account terms for first-time buyers.

How long does delivery take?
Standard models ship within 15-20 working days of order confirmation. Custom or bulk orders require 30-45 working days. Ocean freight transit adds 15-35 days depending on destination.

What compliance documentation is provided?
Every order includes: Certificate of Origin (CCPIT-issued), Commercial Invoice, Packing List, Bill of Lading, material certificates (EN 10204 Type 3.1), weld inspection reports (ISO 5817), coating thickness reports, dimensional conformance report, and Declaration of Conformity. Additional documentation (Form A/E, fumigation cert, CE/UKCA package) available on request.

Can I get a sample before placing a bulk order?
Yes. Standard model samples can be shipped for evaluation. Freight cost is borne by the buyer (FedEx/DHL). The sample cost is refunded against your first production order.

What is the warranty on Dengtai ladders?
5-year manufacturing defect warranty. Corrosion warranty by material: HDG 2 years, SS304 5 years, SS316 10 years. After-sales: 48-hour response to any issue. If a dimensional error is our fault, we bear the full replacement cost including freight.

How do I start the ordering process?
Send your specification to sales@dtsteelladder.com including: ladder type, height, material, quantity, destination port, and applicable standard. Receive a detailed quotation within 24 hours.

The Dengtai Procurement Process

When you source steel ladders from Dengtai, the process follows six clear stages:

Stage 1: Inquiry and Specification — Send your requirements (ladder type, height, material, quantity, destination port, applicable standard) to sales@dtsteelladder.com. Our engineering team reviews your specification and returns a line-item quotation within 24 hours.

Stage 2: Engineering Review — Senior Engineer Jouth Zhao reviews technical feasibility. For standard products, we confirm the specification. For custom products, we return CAD drawings for your approval. This stage typically takes 1-3 business days.

Stage 3: Order Confirmation — 30% T/T deposit confirms your order. For orders over $10,000, L/C at sight is available. Production scheduling begins immediately upon deposit receipt.

Stage 4: Production and QC — Standard models: 15-20 working days. Custom/bulk: 30-45 working days. Our five-step QC process runs throughout: (1) raw material certification verification, (2) ISO 5817 weld inspection at each joint, (3) coating thickness measurement per ISO 2808, (4) pre-assembly fit check with bracket matching, (5) VCI + vacuum-sealed packaging inspection.

Stage 5: Pre-Shipment Review — Before shipment, you receive: QC documentation package (material certs, weld reports, coating reports, dimensional conformance), container loading photographs, and the container seal number. Review and approve before we release the shipment.

Stage 6: Shipment and Delivery — Container loaded at Tianjin port. Shipping documents sent via courier. Customs clearance support documentation provided. After-sales: 48-hour response to any question or issue.

Real-World Project Examples

The following Dengtai case studies demonstrate how proper specification and material selection deliver successful outcomes:

Thailand Petrochemical (2022) — 43 HDG fixed ladders and 12 platform sets for PTT Global Chemical. Standard and extended-length models used throughout the petrochemical complex.

Singapore Marina Bay (2023) — 16 SS304 caged ladders for CapitaLand’s Marina Bay commercial development. Stainless steel finish specified for visible architectural applications in Singapore’s marine environment.

Philippines Water Treatment (2023) — 22 SS316 deep well ladders for Maynilad wastewater treatment. SS316 specified for hydrogen sulfide corrosion resistance in confined wet well environments.

These projects are documented in full in our Case Studies section. Each includes project background, technical challenges, solution details, and quantified results.

Dengtai Product Specifications

All Dengtai steel ladders are manufactured to consistent quality standards with the following baseline specifications:

Standard Dimensions:

Rung spacing: 300mm center-to-center (meets OSHA max 305mm, EN max 300mm, AS max 300mm)
Rung type: Round bar, 20mm diameter, anti-slip serrated surface
Stile (side rail) section: Channel or flat bar depending on model and load rating
Top extension: 1,100mm above landing surface per OSHA 1910.23(d)(4)(iv)
Bottom clearance: 150-250mm from finished grade

Material Standards:

Q235B: GB/T 700 (equivalent to EN 1.0038, ASTM A283 Grade C)
Q345B: GB/T 1591 (equivalent to EN 1.0044, ASTM A572 Grade 50)
SS304: GB/T 20878 06Cr19Ni10 (equivalent to EN 1.4301, ASTM A240 Type 304)
SS316: GB/T 20878 06Cr17Ni12Mo2 (equivalent to EN 1.4401, ASTM A240 Type 316)

Surface Treatment Standards:

Hot-Dip Galvanized: ISO 1461, Fe/Zn115 minimum (coating thickness 80um average)
Heavy-Duty HDG: ISO 1461, Fe/Zn135 minimum (coating thickness 100um average)
Stainless Passivation: ASTM A380, nitric acid method
SS316 Pickling + Passivation: ASTM A380, full chemical treatment

Welding Standards:

Weld quality: ISO 5817, Level C (general structures)
Welder qualification: ISO 9606-1
WPS: Documented per project, qualified per ISO 15614-1

Quality Control Process in Detail

Dengtai applies a five-stage quality control process to every production batch. This systematic approach catches issues when correction costs are lowest.

Stage 1: Incoming Material Inspection
Every batch of incoming steel (plate, bar, channel) is verified against:

Mill test certificate (chemical composition, mechanical properties)
Dimensional verification (thickness, width, straightness)
Visual inspection for surface defects (pitting, lamination, scale)
Heat number recording for traceability to individual ladder components

Stage 2: Welding Inspection
During and after welding:

In-process: Welder qualification verification, WPS compliance check, interpass temperature monitoring (stainless steel)
Post-weld: 100% visual inspection per ISO 17637, weld profile measurement (throat thickness, leg length), spatter check (stainless must be spatter-free)
NDT sampling: Dye penetrant (PT) on 10% of stainless welds, magnetic particle (MT) on 5% of carbon steel structural welds
Rejection criteria: Cracks, lack of fusion, incomplete penetration, undercut >0.5mm, porosity cluster >3mm

Stage 3: Surface Treatment Inspection
After galvanizing or passivation:

HDG: Coating thickness measured at minimum 5 points per ladder section (ISO 2808 magnetic method), uniformity check (no bare spots, no lumps, no ash), adhesion test (visual — no flaking or delamination)
Stainless passivation: Verification of treatment (copper sulfate test per ASTM A380), surface roughness measurement (target Ra 0.4-0.8um for #240 brushed)
Acceptance: All measurements recorded against the specification; non-conforming items are re-treated

Stage 4: Pre-Assembly Fit Check
Before packaging:

Brackets are trial-fitted to stiles to verify bolt hole alignment
Multi-section ladders: section flanges are aligned and trial-bolted
Platforms are attached to verify interface fit
Any interference, misalignment, or fit issue is corrected before proceeding
Photographs taken of the pre-assembly setup

Stage 5: Final QC and Packaging
Before container loading:

Dimensional conformance: Overall length, width, rung spacing, cage diameter verified on a sample basis
Accessories check: All ordered brackets, hardware, platforms, and spare parts are verified present
Packaging: VCI wrapping per MIL-B-22020, vacuum seal integrity, ISPM 15 stamp verification, crate label accuracy
Documentation: QC records compiled into the shipment documentation package
Pre-loading photographs: Every ladder and component photographed in its packaged state

Comparing Dengtai to Industry Alternatives

Dengtai vs. Domestic Distributors (US/EU/AU Markets)

Factor	Dengtai (Factory-Direct)	Domestic Distributor
Price	Factory price + freight + duty	2-4x factory price (includes warehousing, local delivery, compliance admin)
Lead time	8-12 weeks total	1-2 weeks (from local stock)
MOQ	1 unit (standard models)	1 unit
Customization	Factory-direct engineering	Limited to stocked configurations
Documentation	Direct from manufacturer	Distributor back-to-back
Best for	Planned procurement, cost-sensitive, custom specs	Emergency replacement, single unit need, local compliance simplicity

Dengtai vs. Other Chinese Manufacturers

Factor	Dengtai	Typical Chinese Supplier
Factory size	3,000m2	500-2,000m2
Export experience	20+ years, 50+ countries	3-10 years, 5-15 countries
ISO 9001	Current, verifiable	May be expired or non-genuine
Compliance documentation	Full package with every order	May need to be requested/negotiated
QC process	Documented 5-stage	May be informal or undocumented
Custom engineering	In-house, 3 engineers	May subcontract to third-party workshop
After-sales	48h response, warranty	May be difficult to reach post-delivery
English communication	Dedicated sales + engineering	May require translator

How to Get the Best Price from Dengtai

Provide complete specifications upfront — Each clarification back-and-forth adds time. A complete initial inquiry (ladder type, height, material, quantity, destination, standard) produces the fastest, most accurate quotation.
Order in container-friendly quantities — Shipping costs per unit drop significantly at full container loads. For standard 6m caged ladders, a 40ft container holds 55-70 units. Freight per unit in a full container is $40-70; LCL (less than container load) is $150-300+.
Combine multiple ladder types in one order — A mixed order of fixed ladders, caged ladders, and platforms optimized for container utilization saves freight compared to separate shipments.
Consider annual procurement — If you have recurring needs, discuss an annual supply agreement. Committed annual volumes enable: reserved production capacity, lower per-unit pricing, consistent lead times, and priority scheduling.
Standardize where possible — Every custom dimension increases cost and lead time. Before spec’ing a custom height, check whether a standard height can meet the requirement. Standard ladders are pre-engineered, cost less, and ship faster.
Pay attention to the shipping term — FOB gives you control of freight costs but requires freight forwarder management. CIF provides a single delivered-to-port price but the seller’s forwarder may not be the cheapest. Compare both and choose the best for your logistics situation.

Contact and Ordering

Ready to source steel ladders? Send your specification for a quotation within 24 hours.

What to include in your inquiry:

Ladder type (fixed, caged, cat, monkey, roof access)
Material preference (HDG, SS304, SS316) or request a recommendation
Height (climbing height in meters — we add the top extension)
Quantity (per type)
Destination port and country
Applicable standard (or project country — we identify the standard)
Any special requirements (ladder safety system, custom color, seismic restraint, classification society)

Email: sales@dtsteelladder.com
WhatsApp: +86 155 1187 9488

Get a Quote for HDG Fixed Ladders

Factory-direct pricing from $23/m. Standard models ship in 15-20 working days.

Email: sales@dtsteelladder.com
WhatsApp: +86 155 1187 9488

<div class=”cta-section”>
Request a Quote
All Fixed Ladders
</div>

Content reviewed by Jouth Zhao, Senior Engineer, Dengtai Staircase Manufacturing Co., Ltd. HDG specifications verified against ISO 1461 and ASTM A123.

</script>

hot-dip-galvanized